Hello i have an old linn 1972 with a valhalla and the motor that use the metal bracket and the spring, this motor died
so i bought a used premotec motor and install it surprise it run faster
like 45
i checked the 2 motors and the old one has a smaller pulley
that's the problem
what will be the best way to cure that problem
i tried to pull out the pulleys and change it impossible
Is there a way to pull out these pulley a linn tech says no
anyway i would like to keep the pulley as they are now, the tech told me that the larger is better, less vibrations
the second way should be to buy another used valhalla 175.00+shipping
Or can the old valhalla be mod to low down the speed
and third the hz what a confusion
the old motor says 50-60 hz 110v 250-300 rpm small pulley
the new one say 50 hz 110 v large pulley
is the old motor 50 or 60hz
do i need a 50 hz valalla or a 60
so i bought a used premotec motor and install it surprise it run faster
like 45
i checked the 2 motors and the old one has a smaller pulley
that's the problem
what will be the best way to cure that problem
i tried to pull out the pulleys and change it impossible
Is there a way to pull out these pulley a linn tech says no
anyway i would like to keep the pulley as they are now, the tech told me that the larger is better, less vibrations
the second way should be to buy another used valhalla 175.00+shipping
Or can the old valhalla be mod to low down the speed
and third the hz what a confusion
the old motor says 50-60 hz 110v 250-300 rpm small pulley
the new one say 50 hz 110 v large pulley
is the old motor 50 or 60hz
do i need a 50 hz valalla or a 60